回 帖 发 新 帖 刷新版面

主题:linux下的memcpy源码和大家分享

/*
 *  linux/arch/alpha/lib/memcpy.c
 *
 *  Copyright (C) 1995  Linus Torvalds
 */

/*
 * This is a reasonably optimized memcpy() routine.
 */

/*
 * Note that the C code is written to be optimized into good assembly. However,
 * at this point gcc is unable to sanely compile "if (n >= 0)", resulting in a
 * explicit compare against 0 (instead of just using the proper "blt reg, xx" or
 * "bge reg, xx"). I hope alpha-gcc will be fixed to notice this eventually..
 */

#include <linux/types.h>

/*
 * This should be done in one go with ldq_u*2/mask/stq_u. Do it
 * with a macro so that we can fix it up later..
 */
#define ALIGN_DEST_TO8_UP(d,s,n) \
    while (d & 7) { \
        if (n <= 0) return; \
        n--; \
        *(char *) d = *(char *) s; \
        d++; s++; \
    }
#define ALIGN_DEST_TO8_DN(d,s,n) \
    while (d & 7) { \
        if (n <= 0) return; \
        n--; \
        d--; s--; \
        *(char *) d = *(char *) s; \
    }

/*
 * This should similarly be done with ldq_u*2/mask/stq. The destination
 * is aligned, but we don't fill in a full quad-word
 */
#define DO_REST_UP(d,s,n) \
    while (n > 0) { \
        n--; \
        *(char *) d = *(char *) s; \
        d++; s++; \
    }
#define DO_REST_DN(d,s,n) \
    while (n > 0) { \
        n--; \
        d--; s--; \
        *(char *) d = *(char *) s; \
    }

/*
 * This should be done with ldq/mask/stq. The source and destination are
 * aligned, but we don't fill in a full quad-word
 */
#define DO_REST_ALIGNED_UP(d,s,n) DO_REST_UP(d,s,n)
#define DO_REST_ALIGNED_DN(d,s,n) DO_REST_DN(d,s,n)

/*
 * This does unaligned memory copies. We want to avoid storing to
 * an unaligned address, as that would do a read-modify-write cycle.
 * We also want to avoid double-reading the unaligned reads.
 *
 * Note the ordering to try to avoid load (and address generation) latencies.
 */
static inline void __memcpy_unaligned_up (unsigned long d, unsigned long s,
                      long n)
{
    ALIGN_DEST_TO8_UP(d,s,n);
    n -= 8;            /* to avoid compare against 8 in the loop */
    if (n >= 0) {
        unsigned long low_word, high_word;
        __asm__("ldq_u %0,%1":"=r" (low_word):"m" (*(unsigned long *) s));
        do {
            unsigned long tmp;
            __asm__("ldq_u %0,%1":"=r" (high_word):"m" (*(unsigned long *)(s+8)));
            n -= 8;
            __asm__("extql %1,%2,%0"
                :"=r" (low_word)
                :"r" (low_word), "r" (s));
            __asm__("extqh %1,%2,%0"
                :"=r" (tmp)
                :"r" (high_word), "r" (s));
            s += 8;
            *(unsigned long *) d = low_word | tmp;
            d += 8;
            low_word = high_word;
        } while (n >= 0);
    }
    n += 8;
    DO_REST_UP(d,s,n);
}

static inline void __memcpy_unaligned_dn (unsigned long d, unsigned long s,
                      long n)
{
    /* I don't understand AXP assembler well enough for this. -Tim */
    s += n;
    d += n;
    while (n--)
        * (char *) --d = * (char *) --s;
}

/*
 * Hmm.. Strange. The __asm__ here is there to make gcc use an integer register
 * for the load-store. I don't know why, but it would seem that using a floating
 * point register for the move seems to slow things down (very small difference,
 * though).
 *
 * Note the ordering to try to avoid load (and address generation) latencies.
 */
static inline void __memcpy_aligned_up (unsigned long d, unsigned long s,
                    long n)
{
    ALIGN_DEST_TO8_UP(d,s,n);
    n -= 8;
    while (n >= 0) {
        unsigned long tmp;
        __asm__("ldq %0,%1":"=r" (tmp):"m" (*(unsigned long *) s));
        n -= 8;
        s += 8;
        *(unsigned long *) d = tmp;
        d += 8;
    }
    n += 8;
    DO_REST_ALIGNED_UP(d,s,n);
}
static inline void __memcpy_aligned_dn (unsigned long d, unsigned long s,
                    long n)
{
    s += n;
    d += n;
    ALIGN_DEST_TO8_DN(d,s,n);
    n -= 8;
    while (n >= 0) {
        unsigned long tmp;
        s -= 8;
        __asm__("ldq %0,%1":"=r" (tmp):"m" (*(unsigned long *) s));
        n -= 8;
        d -= 8;
        *(unsigned long *) d = tmp;
    }
    n += 8;
    DO_REST_ALIGNED_DN(d,s,n);
}

void * memcpy(void * dest, const void *src, size_t n)
{
    if (!(((unsigned long) dest ^ (unsigned long) src) & 7)) {
        __memcpy_aligned_up ((unsigned long) dest, (unsigned long) src,
                     n);
        return dest;
    }
    __memcpy_unaligned_up ((unsigned long) dest, (unsigned long) src, n);
    return dest;
}

/* For backward modules compatibility, define __memcpy.  */
asm("__memcpy = memcpy; .globl __memcpy");

回复列表 (共3个回复)

沙发

UP
没想到一个memcpy的实现代码这么长,还以为只有几行而已

板凳

我觉得memcpy不需要太过优化,谁会非常频繁的调它~

3 楼

脚本语言里处理字符串,变量和对象的传递,大概都会经常用到吧.

我来回复

您尚未登录,请登录后再回复。点此登录或注册