您所在位置：主题：simmechanics的一个小问题，请教高手
hkj1635
[专家分：0] 发布于 2007-06-12 16:16:00
在用simmechanics建模后运行时提示说Revolute模块出现这样一个错误，如下：
Error originates in Mechanical block untitled1/Revolute3. Coordinate systems attached to this joint must lie on the prismatic axis (1 axis) or in the plane of the prismatic axes (2 axes). If joint has no prismatic axes, attachment coordinate systems must be collocated, within tolerances.
在里面转动副的默认坐标是[0 0 1]，是不是这个需要改一下啊，根据什么改，小弟就差这一步了，希望高手们给指点一下啊[em8]
Error originates in Mechanical block untitled1/Revolute3. Coordinate systems attached to this joint must lie on the prismatic axis (1 axis) or in the plane of the prismatic axes (2 axes). If joint has no prismatic axes, attachment coordinate systems must be collocated, within tolerances.
在里面转动副的默认坐标是[0 0 1]，是不是这个需要改一下啊，根据什么改，小弟就差这一步了，希望高手们给指点一下啊[em8]
